Some users may face troubles while clicking photos in their Xiaomi Redmi Note 7 Pro. If that’s the case then you got to immediately reset the camera of your Xiaomi Redmi Note 7 Pro. In the post below we have clearly explained how to restore camera defaults in Xiaomi Redmi Note 7 Pro. On the other hand, You will learn how to get into the advanced settings of your camera and renew the factory camera configuration. This will fix all of the problems linked with the camera performance.
If you recently engaged in a photo shoot where you changed many of your camera’s settings or if you have done it’s without knowing then it’s important that you change those settings back to their original state immediately.
NOTE: The camera may show a blank screen for approximately 10 seconds after performing a reset.
Steps to Reset Camera on Xiaomi Redmi Note 7 Pro
- Press and hold the Power key button for a few seconds as soon as you switch on your phone for the first time.
- Then use your password or pin to unlock your Xiaomi Redmi Note 7 Pro.
- In the main menu of your phone, you will find the camera click on the app.
- After that click on the 3 horizontal lines at the right corner of the screen.
- Then select the Settings option.
- Finally, tap on the Restore default settings option.
- Then click on the OK button to confirm.
Struggling to open a camera?
If your struggling to open the Camera, then follow the guide below to solve the problem
Check whether any third-party apps are using the camera in your Xiaomi Redmi Note 7 Pro. The camera can be used by only one app at a time on android phones. On that account apps such as Flashlight and QR code scanner may not reprieve the camera precisely due to their design. In such cases, you need to check and Close all the apps that are using the camera and try once again. If you cannot sift out which app is using the camera, then restart your Xiaomi Redmi Note 7 Pro and try again.
Clear Camera data
At first Open “Settings”, search for and access Apps, locate Camera, then go to “Storage” > “CLEAR DATA“. This process will reset the camera settings, but will not harm items in Gallery.
Check the camera permission for all third-party apps on your phone
If a third-party app fails to open the camera, then open “Settings“, search and access App permissions, tap on the “Photos” or “Videos/Camera” option, then you need to provide permission for the app.
Restore your Xiaomi Redmi Note 7 Pro to its factory settings.
Back up your data and restore your Xiaomi Redmi Note 7 Pro to its factory settings:
Open “Settings“, search for and access “Factory data reset“, then follow the on-screen commands to complete the task.
If the issue reoccurs.
Your phone’s hardware might be cracked. Go to Support > Checkup > Start and follow the onscreen commands to check the camera hardware. If the hardware is cracked, back up your data and take your Xiaomi Redmi Note 7 Pro and its purchase proof to an authorized Customer Service Center for assistance.
|Check out how to Hard reset on your android devices.|
|Wipe cache partition on your device.|
|Want you to clear the app cache on your device?|
|In 2021 latest way to reset your network issue.|
Xiaomi Redmi Note 7 Pro Specification
Xiaomi Redmi Note 7 Pro comes with a 6.3 inches IPS LCD display with a screen resolution of 1080 x 2340 pixels. It is powered by 2×2.0 GHz Kryo 460 Gold & 6×1.7 GHz Kryo 460 Silver Octa-core Qualcomm SDM675 Snapdragon 675 (11 nm). The device packs 64/128GB of internal storage and 4/6GB of RAM. There is expandable memory support. The camera on this device sports a Dual camera 48 MP + 5 MP and a front 13 MP for selfies. The Xiaomi Redmi Note 7 Pro backed by a Li-Ion 4000 mAh battery. Xiaomi Redmi Note 7 Pro also has a fingerprint sensor on the back.