Different Methods To Root Your Huawei Device Using PC

For rooting your Huawei using a PC you will require to connect your phone to your PC. Next, make sure that you are using a good quality USB cable and not a cheap one. Then follow any method given below to conduct the rooting process on your Huawei using a PC.

Preparations you need to do before rooting your Huawei device:

Just in case if this is your first time rooting an Android phone, make sure you follow these steps.

  • Make sure your phone is charged at least 50% before you start the process
  • In your settings, activate both “USB debugging mode” and “Install Apps from Unknown Sources.” Before downloading any app.
  • Remember to conduct a full backup of your device.

Different Methods To Root Your Huawei Device Using PC

Follow below 5 different methods with a different tool to start rooting also you can check at bottom of this article about how to UNROOT your device.

How to root Huawei using the KingoRoot method:

Prerequisite:

  • To run KingoRoot on your pc internet access is a must.
  • Remember to charge your device at least 80% as there are chances that your device may run of battery during the rooting process.
  • Try to use the original USB cable or a good quality cable.
  • Conduct full backup first so that there is no loss of data.
  • Firstly you need to power on your device.
  • Then close or shut down any sort of anti-virus software on your computer.
  • Enable USB Debugging Mode on your device:

Go to Settings > Then click on About Phone > Tap 7 times on Build number > Developer Options > USB Debugging.

Ready to Root with KingoRoot:

How to root huawei using Kingoroot

  • After it has downloaded completely, install, and activate KingoRoot Android PC Version.

How to root huawei using Kingoroot

  • Using a USB cable connect your device to your computer.

How to root huawei using Kingoroot

  • Enable USB Debugging mode in case you have already enabled skip this step.

How to root huawei using Kingoroot

  • Enabling USB Debugging mode is an important step in the rooting process.
  • Click on “Always allow from this computer“. To avoid yourself getting an offline device note.
  • Before you start the rooting process, be aware of its benefit and losses.
  • Rooting your Android has many advantages and at the same time disadvantages. Check for it before starting the process.
  • Click on “ROOT” to start.

How to root huawei using Kingoroot

  • The rooting process may take a couple of minutes. just leave it as it is when the rooting begins.
  • Root Succeed!

How to root huawei using Kingoroot

Thankfully your device is well supported and successfully rooted by Kingo.

Finally, it’s time to rest as you have gained full control over your device; if in case you have performed the rooting process through any of the above-mentioned methods. Further, if you want to check whether your device is rooted successfully or not, then go to Google Play App Store, and download the Root Checker app to confirm if the root is successful. We have updated the article on how to check your device rooted or not step by step procedure.

How to root Huawei using magisk:

Prerequisite:

  • Make sure your device battery is charged above 50%
  • Backup your current files and data, full data loss process (save them on external storage).
  • Try to use the original USB cable or a good quality cable.
  • Conduct full backup first so that there is no loss of data.
  • Then close or shut down any sort of anti-virus software on your computer.
  • Enable USB Debugging Mode on your device:

Go to Settings > Then click on About Phone > Tap 7 times on Build number > Developer Options > USB DebuggingEnable Debugging

  • Enable OEM Unlock for the ‘Advanced Reboot.’ There is no complicated process in Huawei.
  • Download and install the Huawei USB driver to your computer system.
  • Also, download and install the ADB drivers on your PC. ( for Linux and Mac)
  • Download Magisk.Zip (Latest Version) file immediately copy it on your device.
  • Download and save the TWRP File and Installer in your PC and rename recovery image file to recovery.img.
  • Click this link to check how to install TWRP recovery for Huawei.

Magisk

You can carry on the rooting process given below as soon as you finish all the preliminary tasks.

Let’s start rooting using Magisk by using TWRP:

  • Connect your device to a computer with the help of a USB cable and enable the transfer of MTP.
  • You have to Copy the magisk zip file to your internal storage.
  • Boot your Huawei into TWRP recovery mode using the suitable key combination.
  • Tap on install the TWRP main screen.

TWRP Home

  • Navigate your phone’s storage and click on magisk installer zip file where the file will be added to the TWRP.
  • Swipe the button at the bottom of the screen to flash the device.
  • As soon as the flashing is complete, tap on reboot system.
  • Now successfully rooting completed.

Finally, it’s time to rest as you have gained full control over your device; if in case you have performed the rooting process through any of the above-mentioned methods. Further, if you want to check whether your device is rooted successfully or not, then go to Google Play App Store, and download the Root Checker app to confirm if the root is successful. We have updated the article on how to check your device rooted or not step by step procedure.

To know how to install TWRP recovery for your Samsung device using Odin click here.

How to Root Huawei using the iRoot method:

Prerequisite:

  • Make sure your device battery is charged above 50%
  • Backup your current files and data, full data loss process (save them on external storage).
  • Try to use the original USB cable or a good quality cable.
  • Conduct full backup first so that there is no loss of data.
  • Then close or shut down any sort of anti-virus software on your computer.
  • Enable USB Debugging Mode on your device:

Go to Settings > Then click on About Phone > Tap 7 times on Build number > Developer Options > USB Debugging

Debugging

  • Enable OEM Unlock for the ‘Advanced Reboot.’ There is no complicated process in Huawei.
  • Download and install the Huawei USB driver to your computer system.

You can carry on the rooting process given below as soon as you finish all the preliminary tasks.

Let’s start rooting using iRoot:

  • You need to Download and install iRoot on your PC.
  • Open the iRoot application.
  • After installing it connect your Huawei to the PC.

iRoot for huawei

  • If you have installed the USB driver of your device on the computer properly, then iRoot will automatically discover your smartphone.
  • Next Click on the “ROOT” button to start the rooting process.

  • iRoot will then automatically reboot your Huawei.
  • Now, click the “Complete” button and unplug your Smartphone.

Root-Successed-With-iRoot

Finally, it’s time to rest as you have gained full control over your device; if in case you have performed the rooting process through any of the above-mentioned methods. Further, if you want to check whether your device is rooted successfully or not, then go to Google Play App Store, and download the Root Checker app to confirm if the root is successful. We have updated the article on how to check your device rooted or not step by step procedure.

How to Root Huawei using iSkysoft root method:

iSkysoft is a platform for over 7000 Android devices. iSkysoft Toolbox is not simply an Android root tool. Cause it carries a plethora of other Android-focused functions for example Android data recovery, data backup and restores, screen recorder, data eraser, sim unlock, etc.

Prerequisite:

  • Make sure your device battery is charged above 50%
  • Backup your current files and data, full data loss process (save them on external storage).
  • Try to use the original USB cable or a good quality cable.
  • Conduct full backup first so that there is no loss of data.
  • Then close or shut down any sort of anti-virus software on your computer.
  • Enable USB Debugging Mode on your device:

Go to Settings > Then click on About Phone > Tap 7 times on Build number > Developer Options > USB Debugging

Debugging

  • Enable OEM Unlock for the ‘Advanced Reboot.’ There is no complicated process in Huawei.
  • Download and install the Huawei USB driver to your computer system.

You can carry on the rooting process given below as soon as you finish all the preliminary tasks.

Let’s start rooting using iSkysoft:

how to root huawei using iSkysoft

  • Download the iSkysoft toolbox.
  • Install the iSkysoft Toolbox and then activate it.
  • Connect your Huawei device to a PC and allow USB debugging.

huawei iskysoft root

toolbox_root_detect

  • Select the root option.
  • iSkysoft Toolbox will then expose your device and find a proper package to root it.
  • Click on the root now option to further confirm the rooting process.toolbox_root_complete
  • Now successfully rooting completed.

Finally, it’s time to rest as you have gained full control over your device; if in case you have performed the rooting process through any of the above-mentioned methods. Further, if you want to check whether your device is rooted successfully or not, then go to Google Play App Store, and download the Root Checker app to confirm if the root is successful. We have updated the article on how to check your device rooted or not step by step procedure.

How to Root Huawei using Root Genius root method:

Prerequisite:

  • Make sure your device battery is charged above 50%
  • Backup your current files and data, full data loss process (save them on external storage).
  • Try to use the original USB cable or a good quality cable.
  • Conduct full backup first so that there is no loss of data.
  • Then close or shut down any sort of anti-virus software on your computer.
  • Enable USB Debugging Mode on your device:

Go to Settings > Then click on About Phone > Tap 7 times on Build number > Developer Options > USB Debugging

Debugging

  • Enable OEM Unlock for the ‘Advanced Reboot.’ There is no complicated process in Huawei.
  • Download and install the Huawei USB driver to your computer system.

You can carry on the rooting process given below as soon as you finish all the preliminary tasks.

Let’s start rooting using Root Genius:

  • Download Root Genius and install it on your PC.
  • Open Root Genius then connect your Huawei to the PC.

Root-Genius-Huawei-root- Connect-usb

  • Root Genius will automatically find out your device.

Root-Genius-Huawei-root

  • Tap on accept to root it.

Root-Genius-Huawei-root-process

  • Root genius will then root your Huawei.

Genius-root-succes

  • Once the rooting process is completed, a success message will pop up on your screen.
  • Now successfully rooting completed.

Finally, it’s time to rest as you have gained full control over your device; if in case you have performed the rooting process through any of the above-mentioned methods. Further, if you want to check whether your device is rooted successfully or not, then go to Google Play App Store, and download the Root Checker app to confirm if the root is successful. We have updated the article on how to check your device rooted or not step by step procedure.

How to Unroot Huawei Phones:

These days many people want to root their android device to gain full control over their phone or tablet. Sometimes you follow a particular guide to root your phone but you are not sure whether the rooting process is successful or not. It’s quite easy to check whether the phone is rooted or not. In this post, we’ll guide you on how to check if your phone is rooted or not with detailed steps.

  • Open “Magisk Manager” from the app drawer.
  • Tap on the “Uninstall” option on the main screen.
  • The Uninstall prompt should show up on the phone’s screen.
  • Select “COMPLETE UNINSTALL” to uninstall Magisk and restore the stock boot image.
  • When the restore process is complete, reboot your device.
  • Finally, remove the Magisk Manager app as well.

Any queries, you can leave a comment on below.

Leave a Comment